48V 100AH 200AH Lifepo4 Battery Lithium Ion Battery
![](https://esolarfamily.com/wp-content/uploads/2023/10/Solar-battery-ESFSBS1-001.jpg)
Product Overview
Solar Battery Introduction
LiFePO4 Solar Battery pack is built-in high quality BMS battery management system, which can manage and monitor cells information ,such as voltage, current and temperature etc. Also, our BMS can balance cells charging and discharging to extend cycle life. Multiple batteries can connected in parallel to expand capacity and power in parallel for larger capacity and longer power.
Product Features
- Make solar energy storage if more power generated
- During the daytime when your solar array might produce more power than you consume, your battery bank will store excess energy.
- The battery can then power your home during peak hours when rates are highest, saving you from paying a higher per kilowatt-hour charge. Batteries are also useful at night and during outages.
Product Advantages
- No maintenance
- More usable storage capacity (called depth of discharge)
- Longer life
- Better efficiency, meaning homeowners get a higher percentage of energy out of lithium-ion batteries than other battery types with the same amount of input
- More energy density, allowing a smaller battery to hold more energy.
Product Specification
PERFORMANCE SPECIFICATIONS | ||
MODEL | 100AH | 200AH |
Nominal Voltage | 48V | |
Cell model/Configuration | 3.2V 100Ah(ANC)/15S1P | 3.2V 100Ah(ANC)/15S2P |
Capacity(Ah) | 100AH | 200AH |
Rated Energy (KWH) | 4.8KWH | 9.6KWH |
Usable Energy(KWH) | 4.32KWH | 8.64KWH |
Max.Charge/Discharge Current(A) | 100A/100A | |
Voltage Range (Vdc) | 42-54V | |
Scalability | Up to 10 parallel | |
Communication | RS232-PC,RS485(B)-BATRS485(A)-Inverter,Canbus-Inverter | |
Cycle Life | ≥6000cycles@25℃,90%DOD,60%EOL | |
Design Life | ≥10 Years (25℃) | |
MECHANICAL SPECIFICATIONS | ||
Weight( Approx) (KG) | 63kg | 96kg |
Dimension(W/D/H)(mm) | 485*690*186(226 lncluding hanger) mm | |
lnstallation Mode | Wall hanging | |
lPGrade | lP21 | |
SECURITY AND CERTIFICATION | ||
Safety(Pack) | UN38.3,MSDS | |
Safety(Cell) | UN38.3,MSDS,IEC62619,CE,UL1973,UL2054 | |
Protection | BMS, Breaker | |
ENVIRONMENTAL SPECIFICATIONS | ||
Operating Temperature(C) | Charge:-10°C~50℃; Discharge: -20°C-50°℃ | |
Altitude (m) | ≤2000 | |
Humidity | ≤95%(Non-condensing) |
![](https://esolarfamily.com/wp-content/uploads/2023/10/Solar-battery-SBS1-001-01.jpg)
![](https://esolarfamily.com/wp-content/uploads/2023/10/Solar-battery-SBS1-001-02.jpg)
![](https://esolarfamily.com/wp-content/uploads/2023/10/Solar-battery_ESF-SBS1-001.jpg)